Comfort Flow Modular Interlocking Tiles



Can't find the size you need? I'm sure we have a solution!
Give us a call at 833-428-0466

SKU: Andersen #4430 #4431 Category:


Comfort Flow Modular Interlocking Tiles are perfect for all your industrial needs. These are great for assembly lines, warehouses, industrial kitchen areas, and more. There are many advantages to a modular tile system. If one tile gets damaged, you can easily change out the damage tile instead of changing out the entire system.

  • Comfort Flow Interlocking Tiles are a high density Nitrile rubber matting system. 
  • Overall thickness of 1/2″.
  • Lightweight and flexible for easy handling and movability. 
  • Nitrile Rubber makes this a grease, oil, and chemical resistant mat with 15% recycled rubber content. 
  • Static Dissipative and Welding Safe.
  • Certified slip resistant by National Floor Safety Institute.
  • Beveled edging comes pre-attached to Corner and Side pieces for safe transition from mat to floor. 
  • Lifetime anti-microbial treatment to prevent odors and degradation of the mat.
  • Comfort FLOW tiles have drainage holes to allow liquids to fall through mat and flow towards the desired drainage area. 
  • Comfort Flow Interlocking Tiles are available in three separate pieces:
    • Corner – 19.125″ x 19.125″
    • Middle – 18″ x 18″ 
    • Side – 18″ x 19.125″ 
  • Also available in Larger Tiles sizes: 
    • Corner – 37.375″ x 37.375″
    • Middle – 36″ x 36″ 
    • Side – 36″ x 37.375″ 
  • Recommended for industrial and kitchen applications or anywhere a rubber runner mat is needed.
  • SpecificationsCONSTRUCTION
    Material: Nitrile rubber
    Thickness: 1/2 inch (0.500″)STANDARDS & TESTING

    • Passes flammability standard DOC-FF1-70
    • Compression Deflection:
      4% at 20 psi
      22.6% at 40 psi
    • ASTM C1028-96 static coefficient of friction:
      Dry 0.87
      Wet 0.88
    • ESD Rating of electrically conductive:
      Surface to surface 50% relative humidity 4.6 x 10^4 ohms
      Surface to surface 12% relative humidity 6.2 x 10^4 ohms

Cleaning Instructions

Comfort Flow HD tiles can be washed in a commercial dishwasher or washed by hand using the following instructions:

  1. Scrub with a deck brush (as needed) using a detergent with a neutral pH.
  2. Rinse with a hose or pressure washer.
  3. Hang to dry.

Installation Instructions

There are three components in the Comfort Flow HD Tile System: the corner tile, the side tile, and the middle tile.

The corner tile has a border on two adjacent sides.
The side tile has a border on one side.
The middle tile has no borders.

  1. Start with a corner tile and attach as many side tiles as needed to complete the width of the installation, ending with another corner tile.
  2. Beginning at the corner tile, attach as many side tiles as needed to complete the length of the installation, ending with another corner tile.
  3. Beginning in one corner, fill in the remaining center space with as many middle tiles as needed to complete the installation.


Comfort Flow and Comfor Scrape Linkable Runner

Hog Heaven II Modular Tiles


Additional information

Choose Width

38.25", 56.25", 74.25", 92.25", 110.25"

Choose Length:

3 ft 2.25 inches, 4 ft 8.25 inches, 6 ft 2.25 inches, 7 ft 8.25 inches, 9 ft 2.25 inches, 10 ft 8.25 inches, 12 ft 2.25 inches, 13 ft 8.25 inches, 15 ft 2.25 inches, 16 ft 8.25 inches, 18 ft 2.25 inches, 19 ft 8.25 inches, 21 ft 2.25 inches, 22 ft 8.25 inches, 24 ft 2.25 inches, 25 ft 8.25 inches, 27 ft 2.25 inches, 28 ft 8.25 inches, 30 ft 2.25 inches, 31 ft 8.25 inches, 33 ft 2.25 inches, 34 ft 8.25 inches, 36 ft 2.25 inches, 37 ft 8.25 inches, 39 ft 2.25 inches, 40 ft 8.25 inches