Foot Grille 1-5/8″ Frame Options-R
Below you will find Pictures of the different Frames Options for the 1-5/8″ Foot Grille
|
|
|
 |
424 “L” Angle Frame
- For Recesses that have already been formed
- Requires a 1-3/4″ Recess Depth
- The 424 Frame screws into the pit floor up against the pit wall
- We make the outside dimension of the frame to fit the pit and then the mat fits inside the frame
- 1/8″ Gauge aluminum reveal
- The frame is necessary to protect the surrounding flooring from damage caused by carts and wheeled traffic.
|
|
|
|
|
 |
Frame 420 L & P – Level Bed
- The 420 Frame is designed to be set in wet concrete
- Lag bolts hold frame tightly in place after concrete sets
- Once the frame is set, the Recessed Foot Grille drops in place
- 1/2″ Gauge aluminum reveal
- Make certain to take thickness of finish floor into account when setting the 420 Frame
|
|
|
|
|
 |
Frame 420/422 For Foot Grilles
- Available with or without a drain pan
- Specify: 420x423x422 with Pan or 420x423x422 Without Pan
- Allows for a deeper recess depth of 2-23/32″ depth
- Cross Supports under the Foot Grille allows for larger quantities of liquids to be retained
- Surface reveal is 1/2″ – Lag Bolts Hold Frame Fast
- Make certain to take thickness of finish floor into account when setting the 420-422 Frame
- Frames can be shipped ahead of mats upon request
|
|
|
|
|
 |
421 L & P Recessed Frames
- The 421 Frame is the stoutest Recessed Frame
- Allowing for a Recess depth of over 4″, with lag bolts and vertical cross supports
- The 421 Frame should be used when large amounts of liquids from rain and snow are anticipated.
- Make certain to take thickness of finished floor into account when setting frame 421
- Available with or without a drain pan
- Frames can be shipped ahead of mats upon request
|
|
Call 800-739-6171 for Assistance or email us at help@madmatter.com
|
|