Aluminum Hinge Low Profile Roll Up Floor Mat 3/8″

Protect flooring and improve workplace safety with a roll up, aluminum entrance mat! The Aluminum Hinge Low Profile Roll Up Floor Mat 3/8″ is an effective commercial entrance mat that reduces cleaning costs and prevents trips, slips, and falls.

Request a Quote

833-428-0461

Weight Limit

350 lbs
Per Wheel Load

Depth

3/8″, with recessed “L” frame 7/16″ (level base)

Rail Spacing

2.0" on Center

Weight Per Sq. Ft.

1.69 lbs

Roll Up Capability

Yes

Warranty

2 Years

General Information – MB300 Series

Aluminum Hinge Low Profile Roll Up Floor Mat 3/8″ is a popular aluminum Entrance Mat because of roll up ease during maintenance.
Stable and solid mat system with added vinyl cushion supports on the bottom of each segment.
Depth: 3/8″, with recessed “L” frame 7/16″ (level base).
Rolling Load: 350 lbs per wheel
LEED: Possible LEED- NC credits; MR credit 4(1-2 points) MR credit 5 (1-2 points) IEQ credit 5 (1 point)
Warranty: 2 years
Weight per Square Foot: 1.69 lbs
Made from 6063-T52 aluminum spaced on 2″ centers, connected with aluminum hinge and 1" x 3/16" slotted holes for maximum drainage
Aluminum Hinge Low Profile Roll Up Floor Mat 3/8″ are dependable entrance mats that can perform for decades. The inserts may require replacing after time, but the aluminum mat itself will sustain.
Can be designed for Indoor or Outdoor use.
Aluminum Hinge Low Profile Roll Up Floor Mat 3/8″ are composed using 49% pre-consumer Recycled Content.
This low profile mat is designed to allow dirt and moisture to fall below the surface so that it does not get tracked into the building.
Aluminum Floor Mat 3/8″ include SURFACE or RECESSED frame options.
Shipping time depends on the type of Metal Finish desired: Standard Mill takes 1-2 weeks, Anodized Finishes can take 3-4 weeks.
Also available as a Vinyl Hinged Mat. CLICK HERE

Ordering Process

Select Aluminum Finish

Choose from a variety of metal finishes.

Select Tread Option

Choose the insert that best fits your needs.

Select Frame

Each model has an array of frame options for different applications.

Step 1:

Aluminum Finishes

Select a finish for your product from the options that you see below.

Step 2:

Tread Options

Below, you'll find an array of insert options.

PLEASE NOTE: Colors are computer generated and do not accurately match actual insert colors. Please refer to actual color samples.

Step 3:

Frame Options

Below, you'll find a selection of frame options for this product.

L-Frame Recessed Application

Use L Frame when the pit has already been formed.
1/2″ total depth, 7/16″ to 1″ bottom leg
1/4″ Gauge Aluminum surface reveal.
Screw in place with tapcons or lead sinkers
Recommended that screeding the pit floor to level with the horizontal leg of the frame profile

Cast in Place Application

Use Cast in Place Frame when a pit has not been form; for wet pour applications.
1/2" Surface Reveal

Vinyl Ramp Surface Applications

Beveled Vinyl Edge allows for surface mat use.
2″ x 3/8″ surface ramp.
Edge is attached directly to the Roll up Mat
Available with or without under-mat tongues upon request.

2" Vinyl Square Edge (VSE)

Use when pit is irregular or out of square.
Vinyl filler can be trimmed easily with a utility knife
7/16" Total depth
When using Vinyl Square Edge filler on all sides, mat will be loose lay

Aluminum Ramp Surface Applications

Beveled Aluminum Edge that can be permanently screwed into the floor with tapcons.
Edge is not attached to the Roll up mat – Holds the mat in place.
1-3/8″ x 3/8″ surface ramp.

Aluminum Threshold

Use for surface/recess installations to provide a flush transition from the entryway door threshold to the mat surface
The frame does not require a leveling screed